Autodesk HSMWorks 2019 free download

Installation tutorial for version 2019:

Easy method: Using XFORCE KeyGen for Autodesk 2019 products:

Visual installation tutorial for Autodesk 2019 activation using XFORCE KeyGen

This method is much easier than the license server method using FlexNET. To use KeyGen, please follow the steps below:

1) Make sure your internet is completely disconnected. Then install the software.

2) After installation, run the software. It will ask for activation at the beginning. Click on the 'enter a serial number' option.

3) In the next window, click on 'Activate'. Then enter one of the following serial numbers (do not copy and paste the serial numbers, enter them manually):

667-98989898

400-45454545

066-66666666

4) To enter the Product Key, open the AUTODESK.2019.Product.Keys.txt file and get the Product Key for your product.

For example, the Product Key for 3D Max 2019 is: 128K1

5) Click on 'Next'. In the 'Activation Options' page, you will be given a 'Request Code'. Copy it with Ctrl+C and run the KeyGen file as administrator.

6) Click on the 'Patch' option until you see the 'Successfully Patched' message. Then enter the 'Request Code' in the 'Request' box and click on 'Generate'.

7) Go back to the software activation page and click on 'I have an activation code from Autodesk'. Paste the code generated in step 6 into the first box.

8) Click on 'Next'. The software is now fully activated.

Note: If the 'Activation Options' page does not appear, it means you are not offline. To fix the problem, start the activation process again (close the activation page and the software, then reopen it).

==========================

Difficult method: Using License Manager for Autodesk 2019 products:

Visual installation tutorial for Autodesk 2019 activation using FlexNET

1) Make sure you are completely disconnected from the internet. Then install the software.

2) After installation, do not run the software.

3) Depending on your system architecture (32-bit or 64-bit), install one of the two folders: Crack-nlm-2018-x64 or Crack-nlm-2018-x86.

4) After installation, replace the files as follows:

A) Replace the adskflex.exe file in the folder C:/Autodesk/Network License Manager

B) Replace the adlmint.dll file in the folder C:/Program Files/Common Files/Autodesk Shared/CLM/V7/MSVC14

5) This step is very important. You need to edit the license file according to your system. The lic.dat file is located in the Crack folder in the Autodesk Network License Manager 2018 Crack by X-Force folder.

Open the file with a text editor like Notepad or Notepad++ and replace the HOSTNAME and MAC expressions with the values from your system.

To get these values, run the LMTools Utility software (which was installed in step 4) and go to the System Settings tab.

Replace the HOSTNAME expression with the Computer/Hostname value and the MAC expression with the Ethernet value.

The work is not done yet!

Now open the License.txt file in the Crack folder and find the FlexNET expression. Edit it according to your product and replace the FEATURE expression with the value from the FLEXNet.Codes.txt file in the Crack folder or from the website.

Then add all the content of the License.txt file to the end of the lic.dat file in a new line.

After doing these three tasks, the lic.dat file is ready for your system. Save it in a permanent location, like C:/lic.dat

6) Go to the LMTools Utility software and fill in the Config Services tab as follows:

- In the Service Name field, enter 'Autodesk'.

- In the Path to the lmgrd.exe file field, enter the path to the lmgrd.exe file, which is usually C:/Autodesk/Autodesk Network License Manager/lmgrd.exe

- In the Path to the license file field, enter the path to the lic.dat file you edited, which is C:/lic.dat in this tutorial.

Check the 'Use Services' and 'Start Server at Power Up' options.

7) Go to the Service/License File tab and select 'Configuration using Services' from the list. Then select 'Autodesk' from the list and make sure the 'LMTools ignores license file path environment variables' option is checked.

8) Go to the Start/Stop/Reread tab and click on the 'Start Server' and 'ReRead License File' options to make sure they are done successfully.

9) Go to the Server Status tab and click on the 'Perform Status Enquiry' option.

10) The server setup is now complete. Make sure your internet is completely disconnected.

11) Run the software and select the 'Help me choose' option when asked about the license.

12) In the next window, select the 'Multi-user' option and make sure the 'Single License Server' tab is selected. Then enter '127.0.0.1' as the server name.

13) Click on 'Done'. The software is now activated.

—————————————————

Installation and activation tutorial for versions 2017 and 2018:

Before starting, make sure to run the KeyGen file as administrator.

1) Enter one of the following serial numbers (do not copy and paste the serial numbers, enter them manually):

666-69696969

2) When asked for the Product Key, enter the following code (do not copy and paste the code, enter it manually):

For version 2018, enter: 128J1

For version 2017, enter: 769I1

3) Complete the installation and restart the software. Then click on the 'Activate' option.

4) Select the 'I have an activation code from Autodesk' option.

5) While in the activation menu, go to the Crack folder and run the KeyGen file according to your software version (32-bit or 64-bit) as administrator.

6) Click on the 'Patch' option until you see the 'successfully patched' message.

7) In the activation window, you will be given a 'Request Code'. Copy it and paste it into the 'Request' box in the KeyGen window, then click on 'Generate'.

8) Copy the code generated by the KeyGen and paste it into the activation window.

9) The software is now activated.